Navigator
| Blade Spindles | Heavy Duty cast iron right-angle gearboxes. |
| Drive Tires | 18 x 10.5-10 Multi-Trac® C/S. |
| Front Caster Tires | 8 x 3.0-4 semi-pneumatic. |
| Caster Forks | 0.50" thick rear caster fork |
| Tractor Frame | Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs. |
| Steering Control | FeatherTouch hand-control drive levers, low-force constant speed lever. |
| Parking Brake | Wet disc, internal in wheel motor. |
| Seat | Commercial grade high back contoured foam padded with hinged mounting. |
| Electrical | 12-volt battery with 20-amp alternator. |
| UPC | 193308000275 |
| Engine Brand | Kohler |
| Engine Model | CH730 |
| Engine Displacement | 725 |
| Engine Series | Command™ EFI |
| Engine Speed | 3,600 rpm |
| Air Filter | Heavy-duty canister air filtration |
| Fuel Type | Gas EFI |
| Fuel Capacity | 7.5-gallon (28.4-L), pivoting tank for easier engine service. |
| Fuel Indicator | Translucent Visual |
| Drive | Hydro-Drive |
| Drive Description | New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors. |
| Speed | Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse. |
| Carb Compliant | Yes |
| Deck Lift | Deck latch for easier height of cut adjustment |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock. |
| ROPS | Optional 2-post foldable ROPS with seat belt and latch. |
| PTO Engagement | Lever-actuated clutching belt with 6" brake band. |
| Drive Wheel Release | Allows movement without engine running. |
| Engine Spec | 3064 |
| Width / Cutting Deck | 48" |
| Deck Style | Floating Deck |
| Deck Style Description | Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly. |
| Deck Construction | 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments . |
| Blades | 2 Blades at 25" Length |
| Bag Capacity | 9.5 bushel (76 gallons) |
| Width | 49.2 in. (125.0 cm) |
| Length | 94.5 in. (240.0 cm) |
| Height | 51.2 in. (130.0 cm) |
| Curb Weight | 1191 |
Gallery
