Radius S-Series
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive. |
| Drive Tires | 23 x 9.5-12 Super Turf |
| Front Caster Tires | 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings (126-3289) |
| Caster Forks | .375" thick caster yoke arms |
| Tractor Frame | Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. |
| Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Parking Brake | Lever-actuated pawl brake. |
| Seat | Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch |
| Electrical | 12-volt battery with 15-amp alternator. |
| Standard Features | Engine hour meter, cup holder, tow hitch and jack receiver |
| UPC | 193308222004 |
| Engine Brand | Kawasaki |
| Engine Model | FX651V |
| Engine Displacement | 726 |
| Engine Series | V-Twin |
| Fuel System | Carbureted |
| Engine Speed | 3700 rpm |
| Air Filter | Cyclonic Air Cleaner |
| Fuel Type | Gas Carbureted |
| Fuel Capacity | 7-gallon (26.5-L) single fuel tank with single fill location. |
| Fuel Indicator | Translucent Visual |
| Drive | Hydro-Drive |
| Drive Description | Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
| Speed | Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse. |
| Carb Compliant | No |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| ROPS | 2-post foldable ROPS standard with seat belt and latch. |
| PTO Engagement | MagStop electromagnetic 125-ft-lb clutch |
| Drive Wheel Release | Allows unit movement without engine running. |
| Engine Spec | _S13 |
| Width / Cutting Deck | 48" |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Deck Construction | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
| Blades | 2 Blades at 24.5" Length |
| Width | 61 in (155 cm) |
| Length | 85 in (216 cm) |
| Height | 70 in (178 cm) |
| Curb Weight | 900 |
Gallery
