Quest X-Series
| Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive. |
| Drive Tires | 22 x 11-10 K3012 |
| Front Caster Tires | 13 x 6.5-5 smooth-tread, pneumatic. |
| Caster Forks | .375" thick caster yoke arms. |
| Tractor Frame | Unibody, riveted 10-guage steel. |
| Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Parking Brake | Lever-actuated pawl brake. |
| Seat | Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position. |
| Electrical | 12 volt battery with 15-amp alternator |
| Standard Features | Engine hour meter, cup holder and hitch |
| UPC | 193308225319 |
| Engine Brand | Kohler |
| Engine Model | KT735 |
| Engine Displacement | 735 |
| Engine Series | 7000 Series |
| Fuel System | Carbureted |
| Engine Speed | 3,600 rpm |
| Air Filter | Standard Engine Manufacturer's air filter |
| Fuel Type | Gas Carbureted |
| Fuel Capacity | 3-gallon (11.0-L), single fuel tank with single fill locations |
| Fuel Indicator | Translucent Visual |
| Drive | Hydro-Drive |
| Drive Description | Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
| Speed | Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse. |
| Carb Compliant | No |
| Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Safety Package | Operator Presence Controls (OPC) and drive system interlock. |
| ROPS | Optional Rigid ROPS with seat belt and latch. |
| PTO Engagement | Electromagnetic 105-ft-lb clutch |
| Drive Wheel Release | Allows unit movement without engine running. |
| Engine Spec | 3099 |
| Width / Cutting Deck | 48" |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Deck Construction | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Cutting Heights | 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. |
| Blades | 3 Blades at 16.25" Length |
| Width | 59.5 in. (151.0 cm) |
| Length | 76.0 in. (193.0 cm) |
| Height | 47.6 in. (121.0 cm) |
| Curb Weight | 680 |
Features
- Our 5-inch deep UltraCut Series 3 cutting deck features fabricated and welded construction, with heavy-duty maintenance-free sealed bearing cutter housings. Our exclusive flow-control baffles deliver Exmark’s signature cut quality.
- The upgraded Hydro-Gear transmissions feature an integrated design, which reduces maintenance and increases reliability, while providing forward speeds of up to 8 mph.
- Aggressive 22-inch drive tires provide superior traction and a smooth ride when combined with the large 13x6.5-inch caster tires.
- The contoured operator seat features deep padding and standard armrests. When combined with the deeper floor pan, which provides more legroom, the Quest X-Series keeps you comfortable while mowing.
- The rear of the Quest X-Series model is protected by a steel guard which provides increased protection for vital engine components.
Gallery
